<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title></title>
</head>
<body>
<font face="Helvetica, Arial, sans-serif" color="#3333ff">Dear all,<br>
<br>
Has anybody tried the AVM FRITZ!Card PCMCIA with a 2.6.8 kernel? Or, a more
general question: does the latest driver "fcpcmcia-suse91-3.11-02.tar.gz"
already support this kernel, or do I need to wait for the suse92 package
(I saw that Suse 9.2 runs on kernel 2.6.8)?<br>
<br>
Please find below a description of my problem.<br>
<br>
-holger</font><br>
<br>
<hr width="100%" size="2"> <font
face="Helvetica, Arial, sans-serif">I have used Capisuite for about a year
on a debian system with a 2.2 kernel and an AVM FRITZ!Card PCMCIA. My hardware
is a VIA EPIA MII board. Everything worked very well until my hard disk crashed
completely.<br>
<br>
With a new hard disk, I am now running<br>
</font>
<ul>
<li><font face="Helvetica, Arial, sans-serif">a debian 2.6.8 kernel</font></li>
<li><font face="Helvetica, Arial, sans-serif">capisuite-0.4.5 (I tried both
the binaries and compiled it myself - same situation), and</font></li>
<li><font face="Helvetica, Arial, sans-serif">the AVM drivers from the "fcpcmcia-suse91-3.11-02.tar.gz"
package (I compiled them without any errors).</font></li>
<li><font face="Helvetica, Arial, sans-serif">"isdnactivecards" V3.3.0.20
is also installed.</font></li>
</ul>
<font face="Helvetica, Arial, sans-serif"><br>
</font><font face="Helvetica, Arial, sans-serif">While the answering machine
part of Capisuite works without any problems, I cannot receive FAXes. My
machine picks up the call, but hangs up after a few milliseconds. The capisuite
error log shows that CAPI sends a <i>DISCONNECT_B3_ACTIVE_IND</i> with error
cause 0x3315 (remote procedure error).<br>
<br>
</font><font face="Helvetica, Arial, sans-serif">I also checked the hardware:
no conflicts with interrupts, dma channels or IO areas.<br>
</font><br>
<hr width="100%" size="2"><font face="Helvetica, Arial, sans-serif">capiinfo
output looks OK:</font><br>
<br>
<small><small><font face="Courier New, Courier, monospace">Number of Controllers
: 1<br>
Controller 1:<br>
Manufacturer: AVM GmbH<br>
CAPI Version: 2.0<br>
Manufacturer Version: 3.101-02 (49.18)<br>
Serial Number: 1000001<br>
BChannels: 2<br>
Global Options: 0x00000039<br>
internal controller supported<br>
DTMF supported<br>
Supplementary Services supported<br>
channel allocation supported (leased lines)<br>
B1 protocols support: 0x4000011f<br>
64 kbit/s with HDLC framing<br>
64 kbit/s bit-transparent operation<br>
V.110 asynconous operation with start/stop byte framing<br>
V.110 synconous operation with HDLC framing<br>
T.30 modem for fax group 3<br>
Modem asyncronous operation with start/stop byte framing<br>
B2 protocols support: 0x00000b1b<br>
ISO 7776 (X.75 SLP)<br>
Transparent<br>
LAPD with Q.921 for D channel X.25 (SAPI 16)<br>
T.30 for fax group 3<br>
ISO 7776 (X.75 SLP) with V.42bis compression<br>
V.120 asyncronous mode<br>
V.120 bit-transparent mode<br>
B3 protocols support: 0x800000bf<br>
Transparent<br>
T.90NL, T.70NL, T.90<br>
ISO 8208 (X.25 DTE-DTE)<br>
X.25 DCE<br>
</font><font color="#ff0000" face="Courier New, Courier, monospace"> T.30
for fax group 3<br>
T.30 for fax group 3 with extensions<br>
</font><font face="Courier New, Courier, monospace"> Modem<br>
<br>
0100<br>
0200<br>
39000000<br>
1f010040<br>
1b0b0000<br>
bf000080<br>
00000000 00000000 00000000 00000000 00000000 00000000<br>
01000001 00020000 00000000 00000000 00000000<br>
<br>
Supplementary services support: 0x000003ff<br>
Hold / Retrieve<br>
Terminal Portability<br>
ECT<br>
3PTY<br>
Call Forwarding<br>
Call Deflection<br>
MCID<br>
CCBS</font></small></small><br>
<br>
<hr width="100%" size="2"><font face="Helvetica, Arial, sans-serif">Here
is the corresponding section from kern.log (after activating an avmcapictrl
trace): The only interesting thing that I can see is that CAPI seems to send
both CONNECT_B3_ACTIVE_IND and DISCONNECT_B3_IND before capisuite can even
respond with CONNECT_B3_ACTIVE_RESP. capisuite.log shows a different order.<br>
</font> <br>
<small><small><font face="Courier New, Courier, monospace">Dec 2 00:06:36
localhost kernel: kcapi: contr 1 set trace=4<br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] CONNECT_IND
ID=001 #0x0014 LEN=0048<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: CIPValue = 0x10<br>
Dec 2 00:06:51 localhost kernel: CalledPartyNumber = Á3692882<br>
Dec 2 00:06:51 localhost kernel: CallingPartyNumber = <21
81>2283690815<br>
Dec 2 00:06:51 localhost kernel: CalledPartySubaddress = default<br>
Dec 2 00:06:51 localhost kernel: CallingPartySubaddress = default<br>
Dec 2 00:06:51 localhost kernel: BC = <80
90 a3><br>
Dec 2 00:06:51 localhost kernel: LLC = default<br>
Dec 2 00:06:51 localhost kernel: HLC = <91
81><br>
Dec 2 00:06:51 localhost kernel: AdditionalInfo = default<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] CONNECT_RESP
ID=001 #0x0014 LEN=0090<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: Reject = 0x0<br>
Dec 2 00:06:51 localhost kernel: BProtocol <br>
Dec 2 00:06:51 localhost kernel: B1protocol = 0x4<br>
Dec 2 00:06:51 localhost kernel: B2protocol = 0x4<br>
Dec 2 00:06:51 localhost kernel: B3protocol = 0x5<br>
Dec 2 00:06:51 localhost kernel: B1configuration = default<br>
Dec 2 00:06:51 localhost kernel: B2configuration = default<br>
Dec 2 00:06:51 localhost kernel: B3configuration = <00
00 00 00 10 2b>49 228 369 2882<24>Holger Magnussen <2d> sent
by CapiSuite<br>
Dec 2 00:06:51 localhost kernel: ConnectedNumber = default<br>
Dec 2 00:06:51 localhost kernel: ConnectedSubaddress = default<br>
Dec 2 00:06:51 localhost kernel: LLC = default<br>
Dec 2 00:06:51 localhost kernel: AdditionalInfo <br>
Dec 2 00:06:51 localhost kernel: BChannelinformation = default<br>
Dec 2 00:06:51 localhost kernel: Keypadfacility = default<br>
Dec 2 00:06:51 localhost kernel: Useruserdata = default<br>
Dec 2 00:06:51 localhost kernel: Facilitydataarray = default<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] CONNECT_ACTIVE_IND
ID=001 #0x0015 LEN=0015<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: ConnectedNumber = default<br>
Dec 2 00:06:51 localhost kernel: ConnectedSubaddress = default<br>
Dec 2 00:06:51 localhost kernel: LLC = default<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: capilib_new_ncci: kcapi: appl 1 ncci 0x10101
up<br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] CONNECT_B3_IND
ID=001 #0x0016 LEN=0022<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: NCPI = <00
00 00 00 00 00 00 00 00><br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] CONNECT_ACTIVE_RESP
ID=001 #0x0015 LEN=0012<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] CONNECT_B3_RESP
ID=001 #0x0016 LEN=0015<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: Reject = 0x0<br>
Dec 2 00:06:51 localhost kernel: NCPI = default<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] CONNECT_B3_ACTIVE_IND
ID=001 #0x0017 LEN=0022<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: NCPI = <00
00 00 00 00 00 00 00 00><br>
Dec 2 00:06:51 localhost kernel: <br>
</font><font color="#ff0000" face="Courier New, Courier, monospace">Dec
2 00:06:51 localhost kernel: kcapi: got [0x1] DISCONNECT_B3_IND ID=001
#0x0018 LEN=0024<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: Reason_B3 = 0x3315<br>
Dec 2 00:06:51 localhost kernel: NCPI = <00
00 00 00 00 00 00 00 00><br>
</font><font face="Courier New, Courier, monospace">Dec 2 00:06:51 localhost
kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] CONNECT_B3_ACTIVE_RESP
ID=001 #0x0017 LEN=0012<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] DISCONNECT_B3_RESP
ID=001 #0x0018 LEN=0012<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x10101<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: appl 1 ncci 0x10101 down<br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] DISCONNECT_REQ
ID=001 #0x0003 LEN=0017<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: AdditionalInfo <br>
Dec 2 00:06:51 localhost kernel: BChannelinformation = default<br>
Dec 2 00:06:51 localhost kernel: Keypadfacility = default<br>
Dec 2 00:06:51 localhost kernel: Useruserdata = default<br>
Dec 2 00:06:51 localhost kernel: Facilitydataarray = default<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] DISCONNECT_CONF
ID=001 #0x0003 LEN=0014<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: Info = 0x0<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: got [0x1] DISCONNECT_IND
ID=001 #0x0019 LEN=0014<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: Reason = 0x3400<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:06:51 localhost kernel: kcapi: put [0x1] DISCONNECT_RESP
ID=001 #0x0019 LEN=0012<br>
Dec 2 00:06:51 localhost kernel: Controller/PLCI/NCCI = 0x101<br>
Dec 2 00:06:51 localhost kernel: <br>
Dec 2 00:07:02 localhost kernel: kcapi: contr 1 set trace=0</font></small></small><font
face="Helvetica, Arial, sans-serif"><br>
<br>
</font>
<hr width="100%" size="2"><font face="Helvetica, Arial, sans-serif">Here
is the corresponding section from capisuite.log (capisuite.error has nothing
of interest in it):<br>
</font> <br>
<small><small><font face="Courier New, Courier, monospace">Thu Dec 2 00:01:32
2004 CapiSuite 0xbffff880: CapiSuite 0.4.5 started.<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: Capi object created<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: >LISTEN_REQ ApplID 0x1 msgNum
0x0 Controller 0x1 InfoMask 0x10 CIPMask 0x0 0x0 NULL NULL<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: <LISTEN_CONF Controller 0x1
Info 0x0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: Registered successful at CAPI with
ApplId 1<br>
Thu Dec 2 00:01:32 2004 CapiSuite 0xbffff880: 1 controllers found<br>
Thu Dec 2 00:01:32 2004 CapiSuite 0xbffff880: Capi driver: AVM Berlin,
version 2.0/1.16<br>
Thu Dec 2 00:01:32 2004 CapiSuite 0xbffff880: Controller 1: AVM GmbH (2
B channels, DTMF, SuppServ, transparent, FaxG3, FaxG3ext), driver version
2.0/49.18<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: >LISTEN_REQ ApplID 0x1 msgNum
0x1 Controller 0x1 InfoMask 0x10 CIPMask 0x10012 0x0 NULL NULL<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: >LISTEN_REQ ApplID 0x1 msgNum
0x2 Controller 0x1 InfoMask 0x10 CIPMask 0x30012 0x0 NULL NULL<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: <LISTEN_CONF Controller 0x1
Info 0x0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: <LISTEN_CONF Controller 0x1
Info 0x0<br>
Thu Dec 2 00:01:32 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <CONNECT_IND PLCI 0x101 CIP
0x10<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: Connection object created
for incoming call PLCI 101 from 02283690815 to 3692882 CIP 0x10<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Pythonscript /usr/local/lib/capisuite/incoming.py,callIncoming,0x80ea580:
PythonScript created.<br>
Thu Dec 2 00:06:51 2004 Pythonscript /usr/local/lib/capisuite/incoming.py,callIncoming,0x80ea580:
Connection 0x80c2810 created IncomingScript<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: call from 02283690815 to
3692882 for faxks connecting with fax<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: accepting with service 1<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: using faxStationID +49 228
369 2882 faxHeadline Holger Magnussen - sent by CapiSuite<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >CONNECT_RESP ApplId 0x1, msgNum
0x14, PLCI 0x101, Reject 0x0, B1proto 0x4, B2proto 0x4, B3proto 0x5<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <CONNECT_ACTIVE_IND PLCI 0x101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >CONNECT_ACTIVE_RESP ApplId
0x1 MsgNum 0x15 PLCI 0x101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <CONNECT_B3_IND NCCI 0x10101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >CONNECT_B3_RESP ApplId 0x1
MsgNum 0x16 NCCI 0x10101 Reject 0x0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <CONNECT_B3_ACTIVE_IND NCCI
0x10101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >CONNECT_B3_ACTIVE_RESP ApplId
0x1 MsgNum 0x17 NCCI 0x10101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: fax connected with rate 0,
lowRes, ID: <br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
</font><font color="#ff0000" face="Courier New, Courier, monospace">Thu
Dec 2 00:06:51 2004 Capi 0x80a4680: <DISCONNECT_B3_IND NCCI 0x10101 Reason
0x3315<br>
</font><font face="Courier New, Courier, monospace">Thu Dec 2 00:06:51
2004 Connection 0x80c2810: fax finished with rate 0, lowRes, ID: , 0 pages<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_transmission initiated<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_transmission finished<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_reception finished<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >DISCONNECT_B3_RESP ApplId 0x1
MsgNum 0x18 NCCI 0x10101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: disconnect initiated<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >DISCONNECT_REQ ApplId 0x1 MsgNum
0x3 PLCI 0x101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <DISCONNECT_CONF PLCI 0x101
Info 0x0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: *<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: <DISCONNECT_IND PLCI 0x101 Reason
0x3400<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: >DISCONNECT_RESP ApplId 0x1
MsgNum 0x19 PLCI 0x101<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: info: 0<br>
Thu Dec 2 00:06:51 2004 Capi 0x80a4680: **<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: connection lost with cause
0x3400,0x3315<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: Python: deleting connection
object<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_transmission initiated<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_transmission finished<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: stop_file_reception finished<br>
Thu Dec 2 00:06:51 2004 Connection 0x80c2810: Connection object deleted<br>
Thu Dec 2 00:06:51 2004 Pythonscript /usr/local/lib/capisuite/incoming.py,callIncoming,0x80ea580:
IncomingScript deleted<br>
Thu Dec 2 00:06:51 2004 Pythonscript /usr/local/lib/capisuite/incoming.py,callIncoming,0x80ea580:
PythonScript deleted.</font></small></small><br>
<small><small><font face="Courier New, Courier, monospace"></font></small></small><br>
<hr width="100%" size="2">
</body>
</html>