<html><head><meta name="qrichtext" content="1" /></head><body style="font-size:11pt;font-family:Bitstream Vera Sans Mono">
<p>Hi,</p>
<p>after upgrading Kubuntu from Hoary (2.6.10-5-686) to Breezy (2.6.12-9-686),</p>
<p>the B1 pcmcia card stopped working. kernel complains:</p>
<p></p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.574000] CAPI Subsystem Rev 1.1.2.8</p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.631000] b1: revision 1.1.2.2</p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.672000] b1pci: revision 1.1.2.2</p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.704000] avm_cs: testing i/o 0x150-0x16f</p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.744000] b1pcmcia: unable to get IRQ 11.</p>
<p>Nov 2 23:33:30 localhost kernel: [4382438.744000] avm_cs: failed to add AVM-B1-Controller at i/o 0x150, irq 11</p>
<p></p>
<p></p>
<p> 0: 8298599 XT-PIC timer</p>
<p> 1: 8499 XT-PIC i8042</p>
<p> 2: 0 XT-PIC cascade</p>
<p> 4: 205733 XT-PIC Intel 82801DB-ICH4, yenta, ipw2200, eth0</p>
<p> 5: 16598 XT-PIC uhci_hcd:usb2</p>
<p> 7: 1 XT-PIC parport0</p>
<p> 8: 0 XT-PIC rtc</p>
<p> 9: 197395 XT-PIC acpi</p>
<p> 10: 4 XT-PIC uhci_hcd:usb3, ehci_hcd:usb4, ohci1394</p>
<p> 11: 20 XT-PIC uhci_hcd:usb1, yenta</p>
<p> 12: 5969 XT-PIC i8042</p>
<p> 14: 26285 XT-PIC ide0</p>
<p> 15: 74125 XT-PIC ide1</p>
<p></p>
<p>In Hoary IRQ 3 was used:</p>
<p></p>
<p>Nov 1 18:44:15 localhost kernel: CAPI Subsystem Rev 1.1.2.8</p>
<p>Nov 1 18:44:15 localhost kernel: b1: revision 1.1.2.2</p>
<p>Nov 1 18:44:15 localhost kernel: b1pci: revision 1.1.2.2</p>
<p>Nov 1 18:44:16 localhost kernel: avm_cs: testing i/o 0x150-0x16f</p>
<p>Nov 1 18:44:16 localhost kernel: kcapi: Controller 1: b1pcmcia-150 attached</p>
<p>Nov 1 18:44:16 localhost kernel: b1pcmcia: AVM B1 PCMCIA at i/o 0x150, irq 3, revision 3</p>
<p>Nov 1 18:44:16 localhost kernel: capifs: Rev 1.1.2.3</p>
<p>Nov 1 18:44:16 localhost kernel: capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)</p>
<p>Nov 1 18:44:18 localhost kernel: eth0: no IPv6 routers present</p>
<p>Nov 1 18:44:18 localhost kernel: b1pcmcia-150: card 1 "B1" ready.</p>
<p>Nov 1 18:44:18 localhost kernel: b1pcmcia-150: card 1 Protocol: DSS1</p>
<p>Nov 1 18:44:18 localhost kernel: b1pcmcia-150: card 1 Linetype: point to point</p>
<p>Nov 1 18:44:18 localhost kernel: b1pcmcia-150: B1-card (3.11-03) now active</p>
<p>Nov 1 18:44:18 localhost kernel: kcapi: card 1 "b1pcmcia-150" ready.</p>
<p></p>
<p>Anyone a hint how to make b1pcmcia use the free interrupt 3 again?</p>
<p>I've played with config.opts and avm.conf in /etc/pcmcia/ without success :(</p>
<p></p>
<p>Achim</p>
<p>-- </p>
<p> To me vi is Zen. To use vi is to practice zen. Every command is</p>
<p> a koan. Profound to the user, unintelligible to the uninitiated.</p>
<p> You discover truth everytime you use it.</p>
<p> -- reddy@lion.austin.ibm.com</p>
<p></p>
</body></html>