linux-avmb1:B1-PCI und Kernel 2.6.7-1.494.2.2 unter FC2
Bernd Staschik
bas66 at gmx.de
Sun Aug 15 19:50:03 CEST 2004
Hi all,
mir scheint, ich habe ein ähnlich gelagertes Problem wie Christian (b1-PCI und Kernel 2.6.1) nur sollte das doch im 2.6.7 Kernel schon längst mit drin sein? Hier die Info´s, die ich habe:
lsmod | grep capi
capidrv 26805 0
isdn 129697 1 capidrv
capi 13441 0
capifs 4041 2 capi
kernelcapi 39393 5 capidrv,capi,b1pci,b1dma,b1
lsmod | grep b1
b1pci 7757 0
b1dma 14701 1 b1pci
b1 22093 2 b1pci,b1dma
kernelcapi 39393 5 capidrv,capi,b1pci,b1dma,b1
dmesg (nach dem booten)
...
CAPI Subsystem Rev 1.1.2.8
b1: revision 1.1.2.2
b1dma: revision 1.1.2.3
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 9 (level, low) -> IRQ 9
b1pci: PCI BIOS reports AVM-B1 at i/o 0xa800, irq 9
kcapi: Controller 1: b1pci-a800 attached
b1pci: AVM B1 PCI at i/o 0xa800, irq 9, revision 2
b1pci: revision 1.1.2.2
divert: freeing divert_blk for eth0
kcapi: Controller 1: b1pci-a800 unregistered
...
lade ich die Module mit der "Hand" bekomme ich unter dmesg folgenden Eintrag:
....
CAPI Subsystem Rev 1.1.2.8
b1: revision 1.1.2.2
b1dma: revision 1.1.2.3
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 9 (level, low) -> IRQ 9
b1pci: PCI BIOS reports AVM-B1 at i/o 0xa800, irq 9
kcapi: Controller 1: b1pci-a800 attached
b1pci: AVM B1 PCI at i/o 0xa800, irq 9, revision 2
b1pci: revision 1.1.2.2
capifs: Rev 1.1.2.3
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
capidrv: Rev 1.1.2.2: loaded
aber trotzdem funktioniert die B1 nicht. Das laden der Firmware crashed das gesamte System
capiinit start
ERROR: cannot load module kernelcapi
capiinfo
capi not installed - No such device or address (6)
cat /proc/capi/controller
1 b1pci detected b1pci-a800 - - 0xa800 9 r2
cat /proc/capi/controllers/1
name b1pci-a800
io 0xa800
irq 9
type B1 PCI
cardname
Kann mir bitte jemand helfen, warum die Kiste nicht läuft, ich versteh so langsam nichts mehr.
Die Kernel src Doku hab ich bereits durch :-( und auch google hab ich durch
Gruß aus München
Bernd
__________________________________________________
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mlists.in-berlin.de/pipermail/linux-avmb1-mlists.in-berlin.de/attachments/20040815/890bc88c/attachment.htm
More information about the linux-avmb1
mailing list