linux-avmb1:verbindungsaufbau scheitert mit fritzcard dsl sl usb

[Barnabas Thwaites]

Hallo!

Ich habe den avm-Treiber für debian (Kernel 2.4.22) kompiliert. Die
Module werden auch geladen, die "usb"- und "dsl"-Leuchten am Modem
leuchten.
Ich habe das Modem an einem analogen Telefonanschluss und unter Windows
funktioniert es.

Leder bekomme ich unter Linux keine Verbindung zusatande.
Zum Beispiel
/usr/sbin/pppd call isdn/avm
scheitert mit:

CONNECT_CONF info 0x3001 (B1 protocol not supported) for plci 0x101

(in var /log/messages, siehe unten), während capiinfo(auch siehe unten)
ausgibt:

B1 protocols support: 0x10000000

Ich habe mir auch capiconn-2003-02-04.tar.gz heruntergeladen und die
tools ausprobiert, das Ergebnis ist immer das gleiche, z.B.

capiouttest: Info: CONNECT_CONF info 0x3001 (B1 protocol not supported)
for plci 0x101

Skeptisch macht mich, dass capiinfo keinerlei Verbindungsdetails ausgibt
(siehe unten) und die Kernelnachricht (demesg, siehe unten):

kcapi: driver "fcdslslusb" has no add card function.


Hat jemand einen Tip? Ich wäre glücklich.

Gruß, barnabas



Details:

$lsmod; //Auszug

ppp_generic            20836   0 (autoclean)
slhc                    5264   0 (autoclean) [ppp_generic]
fcdslslusb            807600   1
capi                   18304   0
capifs                  4048   1 [capi]
kernelcapi             30624   2 [fcdslslusb capi]
capiutil               22912   0 [kernelcapi]
usb-uhci               23600   0 (unused)
usbcore                63372   1 [fcdslslusb usbkbd usb-uhci]



$capiinfo;

Number of Controllers : 1
Controller 1:
Manufacturer: AVM-GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-04  (49.20)
Serial Number: 0000000
BChannels: 1
Global Options: 0x00000001
    internal controller supported
B1 protocols support: 0x10000000
B2 protocols support: 0x40000002
    Transparent
B3 protocols support: 0x40000001
    Transparent

   0100
   0100
   01000000
   00000010
   02000040
   01000040
   00000000 00000000 00000000 00000000 00000000 00000000
   01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
    Hold / Retrieve
    Terminal Portability
    ECT
    3PTY
    Call Forwarding
    Call Deflection
    MCID
    CCBS


$capiinit start;

ERROR: add_card(fcdslslusb) failed - Input/output error (5)

dabei /var/log/messages:
May 22 14:56:58 localhost kernel: capifs: Rev 1.1.4.1
May 22 14:56:58 localhost kernel: capi20: started up with major 68
May 22 14:56:58 localhost kernel: kcapi: capi20 attached
May 22 14:56:58 localhost kernel: capi20: Rev 1.1.4.2: started up with
major 68 (middleware+capifs)

dabei dmesg:
capifs: Rev 1.1.4.1
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
kcapi: driver "fcdslslusb" has no add card function.



$/usr/sbin/pppd call isdn/avm;

Plugin userpass.so loaded.
userpass: $Revision: 1.4 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.32 $
capiconn:  1.7


dabei /var/log/messages:

May 22 14:35:43 localhost pppd[716]: Plugin userpass.so loaded.
May 22 14:35:43 localhost pppd[716]: userpass: $Revision: 1.4 $
May 22 14:35:43 localhost pppd[716]: Plugin capiplugin.so loaded.
May 22 14:35:43 localhost pppd[716]: capiplugin: $Revision: 1.32 $
May 22 14:35:43 localhost pppd[716]: capiconn:  1.7
May 22 14:35:43 localhost kernel: kcapi: appl 1 up
May 22 14:35:43 localhost pppd[718]: pppd 2.4.2 started by root, uid 0
May 22 14:35:43 localhost pppd[718]: capiplugin: phase serialconn.
May 22 14:35:43 localhost pppd[718]: capiplugin: dialing 03039984330 (hdlc)
May 22 14:35:43 localhost pppd[718]: CONNECT_CONF info 0x3001 (B1
protocol not s
upported) for plci 0x101
May 22 14:35:43 localhost pppd[718]: capiplugin: disconnect(remote): ""
-> "0303
9984330" outgoing (pcli=0x101/ncci=0x0) 0x0000 (0x0000) - No additional
informat
ion
May 22 14:35:48 localhost pppd[718]: capiplugin: dialing 03039984330 (hdlc)
May 22 14:35:48 localhost pppd[718]: CONNECT_CONF info 0x3001 (B1
protocol not s
upported) for plci 0x101
May 22 14:35:48 localhost pppd[718]: capiplugin: disconnect(remote): ""
-> "0303
9984330" outgoing (pcli=0x101/ncci=0x0) 0x0000 (0x0000) - No additional
informat
ion
May 22 14:35:53 localhost pppd[718]: capiplugin: dialing 03039984330 (hdlc)
May 22 14:35:53 localhost pppd[718]: CONNECT_CONF info 0x3001 (B1
protocol not s
upported) for plci 0x101
May 22 14:35:53 localhost pppd[718]: capiplugin: disconnect(remote): ""
-> "0303
9984330" outgoing (pcli=0x101/ncci=0x0) 0x0000 (0x0000) - No additional
informat
ion
May 22 14:35:58 localhost pppd[718]: capiplugin: dialing 03039984330 (hdlc)
May 22 14:35:58 localhost pppd[718]: CONNECT_CONF info 0x3001 (B1
protocol not s
upported) for plci 0x101
May 22 14:35:58 localhost pppd[718]: capiplugin: disconnect(remote): ""
-> "0303
9984330" outgoing (pcli=0x101/ncci=0x0) 0x0000 (0x0000) - No additional
informat
ion
May 22 14:35:59 localhost pppd[718]: capiplugin: exit
May 22 14:35:59 localhost pppd[718]: Exit.
May 22 14:35:59 localhost kernel: kcapi: appl 1 down



dabei dmesg:
kcapi: appl 1 up
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
kcapi: appl 1 down