linux-avmb1:b1 pcmcia stopped working after (k)utuntu hoary->breezy update (2.6.10 -> 2.6.12)

[Achim Bohnet]

Hi,
after upgrading Kubuntu from Hoary (2.6.10-5-686) to Breezy (2.6.12-9-686),
the B1 pcmcia card stopped working.  kernel complains:

Nov  2 23:33:30 localhost kernel: [4382438.574000] CAPI Subsystem Rev 1.1.2.8
Nov  2 23:33:30 localhost kernel: [4382438.631000] b1: revision 1.1.2.2
Nov  2 23:33:30 localhost kernel: [4382438.672000] b1pci: revision 1.1.2.2
Nov  2 23:33:30 localhost kernel: [4382438.704000] avm_cs: testing i/o 0x150-0x16f
Nov  2 23:33:30 localhost kernel: [4382438.744000] b1pcmcia: unable to get IRQ 11.
Nov  2 23:33:30 localhost kernel: [4382438.744000] avm_cs: failed to add AVM-B1-Controller at i/o 0x150, irq 11


  0:    8298599          XT-PIC  timer
  1:       8499          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  4:     205733          XT-PIC  Intel 82801DB-ICH4, yenta, ipw2200, eth0
  5:      16598          XT-PIC  uhci_hcd:usb2
  7:          1          XT-PIC  parport0
  8:          0          XT-PIC  rtc
  9:     197395          XT-PIC  acpi
 10:          4          XT-PIC  uhci_hcd:usb3, ehci_hcd:usb4, ohci1394
 11:         20          XT-PIC  uhci_hcd:usb1, yenta
 12:       5969          XT-PIC  i8042
 14:      26285          XT-PIC  ide0
 15:      74125          XT-PIC  ide1

In Hoary IRQ 3 was used:

Nov  1 18:44:15 localhost kernel: CAPI Subsystem Rev 1.1.2.8
Nov  1 18:44:15 localhost kernel: b1: revision 1.1.2.2
Nov  1 18:44:15 localhost kernel: b1pci: revision 1.1.2.2
Nov  1 18:44:16 localhost kernel: avm_cs: testing i/o 0x150-0x16f
Nov  1 18:44:16 localhost kernel: kcapi: Controller 1: b1pcmcia-150 attached
Nov  1 18:44:16 localhost kernel: b1pcmcia: AVM B1 PCMCIA at i/o 0x150, irq 3, revision 3
Nov  1 18:44:16 localhost kernel: capifs: Rev 1.1.2.3
Nov  1 18:44:16 localhost kernel: capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
Nov  1 18:44:18 localhost kernel: eth0: no IPv6 routers present
Nov  1 18:44:18 localhost kernel: b1pcmcia-150: card 1 "B1" ready.
Nov  1 18:44:18 localhost kernel: b1pcmcia-150: card 1 Protocol: DSS1
Nov  1 18:44:18 localhost kernel: b1pcmcia-150: card 1 Linetype: point to point
Nov  1 18:44:18 localhost kernel: b1pcmcia-150: B1-card (3.11-03) now active
Nov  1 18:44:18 localhost kernel: kcapi: card 1 "b1pcmcia-150" ready.

Anyone a hint how to make b1pcmcia use the free interrupt 3 again?
I've played with config.opts and avm.conf in /etc/pcmcia/ without success :(

Achim
-- 
  To me vi is Zen.  To use vi is to practice zen. Every command is
  a koan. Profound to the user, unintelligible to the uninitiated.
  You discover truth everytime you use it.
                                      -- reddy at lion.austin.ibm.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mlists.in-berlin.de/pipermail/linux-avmb1-mlists.in-berlin.de/attachments/20051102/e2748702/attachment.htm