linux-avmb1:problem for the Fritz!card usb2.1 on Debian with kernel 2.6.13

Haobo Zhou haobo.z at gmail.com
Thu Oct 20 03:20:02 CEST 2005


Dear all,

I am running Debian and the kernel version is 2.6.13. Referred to the
manual, I compiled the kernel. Below is the running modules.
-------------------------------------------------------
#lsmod
Module Size Used by
fcusb2 657304 0
capi 16576 0
capifs 5000 2 capi
kernelcapi 45440 2 fcusb2,capi
------------------------------------------------------
I download fcusb2-suse93-3.11-07.tar.gz and install it. My /etc/capi.conf
like this:
# card file proto io irq mem cardnr options
fcusb2 /lib/firmware/fus2base.frm DSS1 - - -

I copy the fus2base.frm to /lib/firmware.
After all works above, I use 'capiinit start' and got the following
messages:
-----------------------------------------------------------------------------------------------------
ERROR: controller 1: firmware load failed - Device or resource busy (16)

!! CHECK THE KERNEL MESSAGES BEFORE SENDING MAIL !!

ERROR: failed to load firmware for controller 1 driver fcusb2 name
fcusb2-0003
-------------------------------------------------------------------------------------------------------

Messages in the kernel message file like this:
-----------------------------------------------------------
CAPI Subsystem Rev 1.1.2.8 <http://1.1.2.8>
capifs: Rev 1.1.2.3 <http://1.1.2.3>
capi20: Rev 1.1.2.7 <http://1.1.2.7>: started up with major 68
(middleware+capifs)
fcusb2: module license 'Proprietary' taints kernel.
fcusb2: AVM FRITZ!Card USB v2 driver, revision 0.6.4
fcusb2: (fcusb2 built on Oct 6 2005 at 13:21:59)
fcusb2: -- 32 bit CAPI driver --
fcusb2: Loading...
fcusb2 1-1:1.0: usb_probe_interface
fcusb2 1-1:1.0: usb_probe_interface - got id
fcusb2: Driver 'fcusb2' attached to fcusb2-stack. (152)
kcapi: Controller 1: fcusb2-0003 attached
usbcore: registered new driver fcusb2
fcusb2: Loaded.
usb 1-1: capiinit timed out on ep1out len=64/259
usb 1-1: capiinit timed out on ep1out len=0/259
fcusb2: USB I/O error, code -110!
fcusb2: Firmware does not respond!
kcapi: card 1 down.
------------------------------------------------------------------

I also tried another firmware file but still got the same problem. Anyone
please kindly give me
some tips.

Thanks in advance.

Haobo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mlists.in-berlin.de/pipermail/linux-avmb1-mlists.in-berlin.de/attachments/20051020/08a6ace0/attachment.htm 


More information about the linux-avmb1 mailing list