linux-l: Hylafax zum 4.

[kochs]

Hallo ,

ich benutze Suse 6.2 und habe darauf Hylafax installiert,was danach auch
einwandfrei lief seit 4 wochen.
Seit gut 1-2 Wochen bekomme ich folgende Fehlermeldung im messages.log-file
angezeigt.
Woran kann es liegen ? Zusätzlich lasse ich ein SMSgatway laufen. Kann das
eine Fehlerursache sein? (Das SMSGatway läuft seit 1 woche)
Im Log-file vom Hylafax finde ich eine andere Meldung. Die Meldung sagt was
anderes als das von messages.

messages:

Nov 28 17:26:38 hylafax FaxSend[13152]: DELAY 2600 ms
Nov 28 17:26:40 hylafax FaxSend[13152]: MODEM set DTR ON
Nov 28 17:26:40 hylafax FaxSend[13152]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Nov 28 17:26:40 hylafax FaxSend[13152]: MODEM flush i/o
Nov 28 17:26:40 hylafax FaxSend[13152]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 28 17:26:40 hylafax FaxGetty[11220]: ANSWER: Can not lock modem device
Nov 28 17:26:41 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:41 hylafax FaxSend[13152]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Nov 28 17:26:41 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:41 hylafax FaxSend[13152]: <-- [12:AT+FCLASS=?\r]
Nov 28 17:26:41 hylafax FaxSend[13152]: --> [5:0,1,2]
Nov 28 17:26:41 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:41 hylafax FaxSend[13152]: <-- [12:AT+FCLASS=2\r]
Nov 28 17:26:41 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:41 hylafax FaxSend[13152]: <-- [9:AT+FMFR?\r]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [20:ROCKWELL            ]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:42 hylafax FaxSend[13152]: <-- [9:AT+FMDL?\r]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [20:AC/V34              ]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:42 hylafax FaxSend[13152]: <-- [9:AT+FREV?\r]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [13:V1.200-V34_DS]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:42 hylafax FaxSend[13152]: <-- [10:AT+FDCC=?\r]
Nov 28 17:26:42 hylafax FaxSend[13152]: -->
[39:(0,1),(0-5),(0-2),(0-2),(0,1),0,0,(0-7)]
Nov 28 17:26:42 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:42 hylafax FaxSend[13152]: <-- [9:AT+FCQ=?\r]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [1:0]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:43 hylafax FaxSend[13152]: <-- [9:AT+FAP=?\r]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [5:ERROR]
Nov 28 17:26:43 hylafax FaxSend[13152]: <-- [10:AT+FSPL=?\r]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [3:0,1]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:43 hylafax FaxSend[13152]: <-- [12:AT+FCLASS=2\r]
Nov 28 17:26:43 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:43 hylafax FaxSend[13152]: <-- [10:AT+FTBC=0\r]
Nov 28 17:26:44 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:44 hylafax FaxSend[13152]: <-- [10:AT+FBOR=0\r]
Nov 28 17:26:44 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:44 hylafax FaxSend[13152]: <-- [13:AT+FPHCTO=30\r]
Nov 28 17:26:44 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:44 hylafax FaxSend[13152]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Nov 28 17:26:44 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:44 hylafax FaxSend[13152]: MODEM ROCKWELL AC/V34/V1.200-V34_DS
Nov 28 17:26:44 hylafax FaxSend[13152]: <-- [5:ATM0\r]
Nov 28 17:26:45 hylafax FaxSend[13152]: --> [2:OK]
Nov 28 17:26:45 hylafax FaxSend[13152]: MODEM input buffering disabled
Nov 28 17:26:45 hylafax FaxSend[13152]: SEND FAX: JOB 7 DEST 002405448490
COMMID 00000008
Nov 28 17:27:10 hylafax FaxQueuer[13014]: JOB 7 (active dest +2405448490 pri
127 tts 0:00 killtime 2:59:28): CMD DONE: exit status 0x200
Nov 28 17:27:10 hylafax FaxQueuer[13014]: JOB 7 (done dest +2405448490 pri
127 tts 0:00 killtime 2:59:28): SEND DONE: 0:32
Nov 28 17:27:10 hylafax FaxQueuer[13014]: NOTIFY: bin/notify "doneq/q7"
"done" "0:32"
Nov 28 17:27:10 hylafax FaxGetty[11220]: MODEM set DTR OFF
Nov 28 17:27:10 hylafax FaxGetty[11220]: DELAY 2600 ms

Hylafax:

Nov 30 18:07:31.25: [ 1878]: SESSION BEGIN 00000002 2405448490
Nov 30 18:07:31.26: [ 1878]: SEND FAX: JOB 1 DEST 002405448490 COMMID
00000002
Nov 30 18:07:31.26: [ 1878]: MODEM set DTR OFF
Nov 30 18:07:31.26: [ 1878]: DELAY 2600 ms
Nov 30 18:07:33.85: [ 1878]: MODEM set DTR ON
Nov 30 18:07:33.85: [ 1878]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
Nov 30 18:07:33.85: [ 1878]: MODEM flush i/o
Nov 30 18:07:33.85: [ 1878]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 30 18:07:34.00: [ 1878]: --> [2:OK]
Nov 30 18:07:34.00: [ 1878]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Nov 30 18:07:34.15: [ 1878]: --> [2:OK]
Nov 30 18:07:34.15: [ 1878]: <-- [12:AT+FCLASS=2\r]
Nov 30 18:07:34.30: [ 1878]: --> [2:OK]
Nov 30 18:07:34.30: [ 1878]: <-- [10:AT+FTBC=0\r]
Nov 30 18:07:34.45: [ 1878]: --> [2:OK]
Nov 30 18:07:34.45: [ 1878]: <-- [10:AT+FBOR=0\r]
Nov 30 18:07:34.60: [ 1878]: --> [2:OK]
Nov 30 18:07:34.60: [ 1878]: <-- [13:AT+FPHCTO=30\r]
Nov 30 18:07:34.75: [ 1878]: --> [2:OK]
Nov 30 18:07:34.75: [ 1878]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Nov 30 18:07:34.90: [ 1878]: --> [2:OK]
Nov 30 18:07:34.90: [ 1878]: <-- [5:ATM0\r]
Nov 30 18:07:35.05: [ 1878]: --> [2:OK]
Nov 30 18:07:35.05: [ 1878]: MODEM input buffering enabled
Nov 30 18:07:35.05: [ 1878]: <-- [12:AT+FCLASS=2\r]
Nov 30 18:07:35.30: [ 1878]: --> [2:OK]
Nov 30 18:07:35.30: [ 1878]: <-- [10:AT+FTBC=0\r]
Nov 30 18:07:35.55: [ 1878]: --> [2:OK]
Nov 30 18:07:35.55: [ 1878]: <-- [10:AT+FBOR=0\r]
Nov 30 18:07:35.80: [ 1878]: --> [2:OK]
Nov 30 18:07:35.80: [ 1878]: <-- [13:AT+FPHCTO=30\r]
Nov 30 18:07:36.05: [ 1878]: --> [2:OK]
Nov 30 18:07:36.05: [ 1878]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Nov 30 18:07:36.30: [ 1878]: --> [2:OK]
Nov 30 18:07:36.30: [ 1878]: <-- [28:AT+FLID="travelTainment AG"\r]
Nov 30 18:07:36.55: [ 1878]: --> [2:OK]
Nov 30 18:07:36.58: [ 1878]: DIAL 002405448490
Nov 30 18:07:36.58: [ 1878]: <-- [17:ATDT002405448490\r]
Nov 30 18:07:57.25: [ 1878]: --> [5:+FCON]
Nov 30 18:08:00.10: [ 1878]: --> [29:+FCSI: "     +49 2405 448490"]
Nov 30 18:08:00.10: [ 1878]: REMOTE CSI "+49 2405 448490"
Nov 30 18:08:00.50: [ 1878]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
Nov 30 18:08:00.50: [ 1878]: --> [2:OK]
Nov 30 18:08:00.50: [ 1878]: REMOTE best rate 14400 bit/s
Nov 30 18:08:00.50: [ 1878]: REMOTE max page width 1728 pixels in 215 mm
Nov 30 18:08:00.50: [ 1878]: REMOTE max unlimited page length
Nov 30 18:08:00.50: [ 1878]: REMOTE best vres 7.7 line/mm
Nov 30 18:08:00.50: [ 1878]: REMOTE best format 2-D MR
Nov 30 18:08:00.50: [ 1878]: REMOTE best 10 ms/scanline
Nov 30 18:08:00.50: [ 1878]: USE 14400 bit/s
Nov 30 18:08:00.50: [ 1878]: USE 10 ms/scanline
Nov 30 18:08:00.50: [ 1878]: <-- [5:ATH0\r]
Nov 30 18:08:00.74: [ 1878]: --> [9:+FHNG: 20]
Nov 30 18:08:00.74: [ 1878]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Nov 30 18:08:01.32: [ 1878]: --> [2:OK]
Nov 30 18:08:01.32: [ 1878]: MODEM set DTR OFF