linux-l: Isdn noch einmal

[Radoy Pavlov]

Die fritzcard war beschädigt, jetzt habe ich eine
siemens i-surf 1.0 Ich starte sie mit:
modprobe -v hisax type=29 protocol=2 io=0x0100 irq=5
mem=0xc8000 id=siemens .. kriege trotzdem device or
resource busy. Hier ist die isapnp.conf:
# Board 1 has serial identifier 21 83 62 16 78 10 00
25 4d
# (DEBUG)
(READPORT 0x020b)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL))
# or WARNING
(CONFIGURE SIE0010/2204243576 (LD 0
(IO 0 (SIZE 1) (BASE 0x0100)) # ohne check
(INT 0 (IRQ 5 (MODE +E)))
(MEM 0 (BASE 0x0c8000) (MODE bu) (UPPER 0x0c8400))
# (MEM 0 (BASE 0x0c8000) (MODE br) (UPPER 0x000400))
(NAME "SIE0010/2204243576[0]{Siemens ISDN
I-Talk/I-Surf}")
(ACT Y)
))

Und das ist dmesg:

ISDN subsystem Rev: 1.87/1.74/1.92/1.54/1.17/1.2
loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.3a (module)
HiSax: Layer1 Revision 2.36
HiSax: Layer2 Revision 2.20
HiSax: TeiMgr Revision 2.13
HiSax: Layer3 Revision 2.10
HiSax: LinkLayer Revision 2.37
HiSax: Approval certification valid
HiSax: Approved with ELSA Quickstep series cards
HiSax: Approval registration numbers:
HiSax: German D133361J CETECOM ICT Services GmbH
HiSax: EU (D133362J) CETECOM ICT Services GmbH
HiSax: Approved with Eicon Technology Diva 2.01 PCI
cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: ISurf driver Rev. 1.6
ISurf: defined at 0x100 0xc8000 IRQ 5
ISurf: resetting card
ISurf: ISAC version (d): 2086/2186 V1.1
ISurf: resetting card
isar recmsg IRQSTA timeout
ISurf: wrong ISAR version (ret = -2)
HiSax: Card Siemens I-Surf not installed !
ISDN-subsystem unloaded

wrong isar ? ideen bitte !

Danke Radoy
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com