[linux-l] SuSE 9.3 ohne Sound
Boris Kirkorowicz
boris-ml_exp20030531 at kirk.de
So Apr 17 22:52:35 CEST 2005
Hallo,
Am 17.04.05 21.52 schrieb Miriam Winterling:
> Ähm. Du hast also dein SuSE 9.2 platt gemacht und dein 9.3 dann
> eingespielt,
> oder hast du 9.2 "nur" aktualisiert. Ich bin zwar mit SuSE komplett
> draußen aber
> letzteres war früher *immer* eine schlechte Idee.
beides: auf dem Desktop (IBM NetVista) habe ich es per Neuinstallation
gemacht, auf meinem IBM Thinkpad T41 per Update. Ergebnis ist beidesmal identisch.
>>==============================SCHNIPP==============================
>>Driver Info #0:
>>Driver Status: snd-intel8x0 is active
>>Driver Activation Cmd: "modprobe snd-intel8x0"
>>Driver Info #1:
>>Driver Status: i810_audio is not active
>>Driver Activation Cmd: "modprobe i810_audio"
>>==============================SCHNAPP==============================
>>Nach Wiederholung beider Befehle im Terminalfenster ändert sich die vorletzte
>>Zeile in "...is active", aber zu hören ist trotzdem nichts. In der
>>Soundkonfiguration (Yast) wird der Status mit "läuft..." beschrieben, und auch
>>die Lautstärkeeinstellung im Yast und im Mixer habe ich für alle Kanäle auf
>>50% gestellt. Was kann ich sonst noch tun, um die Geräusche hörbar zu machen?
> Ähm. Welche beiden Befehle?
Die bei Driver Activation Cmd genannten.
> Was sagt lsmod? Was sagt /var/log/syslog bzw. messages bzw. boot.log?
Ich schau mal nach...:
Also, lsmod sagt:
==============================SCHNIPP==============================
Module Size Used by
i810_audio 35860 0
ac97_codec 18188 1 i810_audio
ipt_LOG 6912 12
ipt_limit 2432 12
ipt_pkttype 1792 1
usbserial 28008 0
nvram 8200 0
cpufreq_userspace 4316 1
speedstep_centrino 7508 1
freq_table 4484 1 speedstep_centrino
thermal 14088 0
processor 23732 2 speedstep_centrino,thermal
fan 4868 0
button 7056 0
battery 10116 0
ac 5252 0
snd_pcm_oss 57632 0
snd_mixer_oss 18944 1 snd_pcm_oss
ipt_state 2048 12
ip6t_REJECT 6784 3
ipt_REJECT 6656 3
iptable_mangle 2816 0
iptable_filter 2944 1
ip6table_mangle 2432 0
ip_nat_ftp 3072 0
iptable_nat 22236 1 ip_nat_ftp
ip_conntrack_ftp 72592 1 ip_nat_ftp
ip_conntrack 42168 4 ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
ip_tables 20352 8
ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat
ip6table_filter 2816 1
ip6_tables 18304 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 236672 13 ip6t_REJECT
pcmcia 24072 4
usb_storage 63680 0
edd 10080 0
evdev 8832 0
joydev 9664 0
sg 36256 0
st 37788 0
sd_mod 17936 0
sr_mod 16548 0
scsi_mod 125256 5 usb_storage,sg,st,sd_mod,sr_mod
hpfs 70788 0
nls_utf8 2048 1
nls_cp437 5760 1
vfat 12800 1
fat 37916 1 vfat
ath_pci 58912 0
ath_rate_onoe 8840 1 ath_pci
wlan 111580 3 ath_pci,ath_rate_onoe
ath_hal 148432 2 ath_pci
e1000 83508 0
yenta_socket 21128 2
rsrc_nonstatic 10112 1 yenta_socket
pcmcia_core 47024 3 pcmcia,yenta_socket,rsrc_nonstatic
ehci_hcd 31624 0
hw_random 5268 0
uhci_hcd 30224 0
usbcore 108760 5 usbserial,usb_storage,ehci_hcd,uhci_hcd
i2c_i801 8588 0
intel_agp 21532 1
agpgart 32296 1 intel_agp
i2c_core 21776 1 i2c_i801
dm_mod 56316 0
parport_pc 38212 1
lp 11076 0
parport 33864 2 parport_pc,lp
snd_intel8x0 31808 0
snd_ac97_codec 71416 1 snd_intel8x0
snd_pcm 93832 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 24452 1 snd_pcm
snd 60548 6
snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8928 2 i810_audio,snd
snd_page_alloc 9988 2 snd_intel8x0,snd_pcm
reiserfs 242928 1
ide_cd 37892 0
cdrom 36640 2 sr_mod,ide_cd
ide_disk 16640 3
piix 9988 0 [permanent]
ide_core 120020 4 usb_storage,ide_cd,ide_disk,piix
==============================SCHNAPP==============================
/var/log/syslog existiert nicht, und /var/log/messages ist groß... Wonach
sollte ich filtern?
Auf die "Schnelle" (naja, schnell...) ist mir aufgefallen:
alsactl: resmgr: unable to connect to resmgrd: Connection refused
Die Strings intel-8x0 und 810_audio zeigten keine Auffälligkeiten.
> <Kommentar>
> Genau das waren die Gründe warum ich SuSE den Rücken gekehrt habe. SCNR
> <\Kommentar>
Für mich ist es das erste mal, daß ein Standard-Gerät nicht auf Anhieb unter
SuSE funktioniert. Probleme hatte ich bisher eher bei der Suche nach
RPM-Paketen für SuSE. Auch bei SuSE 9.2 funktionierte bei beiden Rechner der
Sound problemlos. Das legt den Verdacht nahe, daß es relativ einfach zu
beheben sein sollte. Wenn man nur weiß, wie... ;-)
Gruss Greetings
Boris Kirkorowicz
--
Falls Ihre eMail versehentlich im Spamfilter hängengeblieben zu sein
scheint, bitte das Formular unter http://www.kirk.de/mail.shtml nutzen.
If your eMail seems to be caught by the SPAM filter by mistake, please
use the form at http://www.kirk.de/mail.shtml to drop me a note.
Mehr Informationen über die Mailingliste linux-l