[linux-l] modprobe + Interrupt, weil kein PnP-Sound

[Kai Kruse]

Hallo Liste,

habe ein ziemlich altes Laptop mit einem Sound, der nicht PnP fähig ist.
Wahrscheinlich muß ich den Interrupt angeben, damit eine Knoppix 
3.8-Installation, Kernel 2.6.11 das Sound-Modul laden kann.

??? Syntax???

modprobe soundcore ?Interrupt????
modprobe opl3sa2 ?Interrupt????

=========================
ad1848                 31396  1 opl3sa2
mpu401                 27940  1 opl3sa2
sound                  71812  3 opl3sa2,ad1848,mpu401
soundcore              11104  1 sound
=========================

ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
pnp: Device 01:01.00 activated.
ad1848: PnP reports 'YAMAHA OPL3-SAx Audio System' at i/o 0x530, irq 5, dma 0, 
7
opl3sa2: probe of 01:01.00 failed with error -16
opl3sa2: No PnP cards found

================================

0000:00:00.0 Host bridge: ALi Corporation M1531 [Aladdin IV] (rev b3)
0000:00:02.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 
(rev 08)
0000:00:05.0 CardBus bridge: O2 Micro, Inc. OZ6832/6833 Cardbus Controller 
(rev34)
0000:00:05.1 CardBus bridge: O2 Micro, Inc. OZ6832/6833 Cardbus Controller 
(rev34)
0000:00:06.0 VGA compatible controller: Neomagic Corporation NM2093 
[MagicGraph128ZV+] (rev 01)  
0000:00:0b.0 IDE interface: ALi Corporation M5229 IDE (rev 20)
0000:00:0c.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 
(rev 08)
0000:00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)

=============================

: pnp: Device 01:01.00 activated.
: ad1848: PnP reports 'YAMAHA OPL3-SAx Audio System'at i/o 0x530, irq 5, dma 
0, 7
: opl3sa2: probe of 01:01.00 failed with error -16
: opl3sa2: No PnP cards found
: cs: IO port probe 0xc00-0xcff: clean.
: cs: IO port probe 0xc00-0xcff: clean.
: cs: IO port probe 0x820-0x8ff: clean.
: cs: IO port probe 0x820-0x8ff: clean.
: cs: IO port probe 0x800-0x80f: clean.
: cs: IO port probe 0x800-0x80f: clean.
: cs: IO port probe 0x100-0x4ff: excluding 0x220-0x2
2f 0x330-0x337 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
Jul 23 08:04:55 fisch kernel: cs: IO port probe 0x100-0x4ff: excluding 
0x220-0x2
2f 0x330-0x337 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
: cs: IO port probe 0xa00-0xaff: clean.
: cs: IO port probe 0xa00-0xaff: clean.
: lp0: using parport0 (interrupt-driven).
: lp0: console ready

=============

via82cxxx via82cxxx_audio

=============

Würde mich über Tipps freuen.
Reichen die Infos?

-- 
--------------
Viele Grüße,
Kai
--------------