[linux-l] Knoppix, SCSI-Controller, SCSI-Festplatten RAID2

Andreas Hessen ahlinux at t0i.de
Do Okt 13 18:56:19 CEST 2005


Hallo Robert,

in meinem Emailkonto ist deine Antwort noch nicht eingetroffen, darum die
Antwort an "mich" in der Liste:

> Bist Du sicher, daß die Hardware von dem von Knoppix eingesetzten Kernel
>  unterstützt wird?

> Poste hier mal die Ausgabe von lspci

knoppix at 0[knoppix]$ su
root at 0[knoppix]# lspci
0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
0000:00:01.0 RAID bus controller: Compaq Computer Corporation Smart Array
5i/532 (rev 01)
0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 08)
0000:00:06.0 System peripheral: Compaq Computer Corporation Advanced
System Management Controller
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51)
0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller
(rev 04)
0000:01:02.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
(rev 01)
0000:01:02.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
(rev 01)
0000:01:03.0 PCI bridge: Intel Corp. 80960RP [i960 RP
Microprocessor/Bridge] (rev 05)
0000:01:03.1 Memory controller: Intel Corp. 80960RP [i960RP
Microprocessor] (rev 05)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
215IIC [Mach64 GT IIC] (rev 7a)
0000:07:07.0 PCI Hot-plug controller: Compaq Computer Corporation PCI
Hotplug Controller (rev 12)
root at 0[knoppix]#

root at 0[knoppix]# dmesg
Linux version 2.6.11 (root at Knoppix) (gcc-Version 3.3.5 (Debian
1:3.3.5-12)) #2 SMP Thu May 26 20:53:11 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
 BIOS-e820: 000000001fffc000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f4fd0
On node 0 totalpages: 131068
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126972 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f4f70
ACPI: RSDT (v001 COMPAQ P23      0x00000002 Ò 0x0000162e) @ 0x1fffc000
ACPI: FADT (v001 COMPAQ P23      0x00000002 Ò 0x0000162e) @ 0x1fffc040
ACPI: MADT (v001 COMPAQ 00000083 0x00000002  0x00000000) @ 0x1fffc100
ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
ACPI: BIOS age (2001) fails cutoff (2002), acpi=force is required to
enable ACPI
ACPI: Disabling ACPI support
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: COMPAQ   Product ID: PROLIANT     APIC at: 0xFEE00000
Processor #3 6:11 APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
I/O APIC #2 Version 17 at 0xFEC01000.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Processors: 1
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=de
apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix
BOOT_IMAGE=linux
__iounmap: bad address c00fffd9
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1126.585 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513336k/524272k available (1847k kernel code, 10176k reserved,
946k data, 292k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2220.03 BogoMIPS (lpj=1110016)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000
00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
per-CPU timeslice cutoff: 1463.37 usecs.
task migration cache decay timeout: 2 msecs.
Total of 1 processors activated (2220.03 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000001
  groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 862k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=10
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050408
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: PnP BIOS support was not detected.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered peer bus 01
PCI: Discovered peer bus 07
PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:0f.2[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:01:02.0[A] -> IRQ 16
PCI->APIC IRQ transform: 0000:01:02.1[B] -> IRQ 17
PCI->APIC IRQ transform: 0000:01:03.1[A] -> IRQ 29
PCI->APIC IRQ transform: 0000:07:07.0[A] -> IRQ 23
PCI: Device 0000:00:00.0 not found by BIOS
PCI: Device 0000:00:00.1 not found by BIOS
PCI: Device 0000:00:00.2 not found by BIOS
PCI: Device 0000:00:00.3 not found by BIOS
PCI: Device 0000:00:0f.0 not found by BIOS
audit: initializing netlink socket (disabled)
audit(1129229055.327:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xef000000, mapped to 0xe0880000, using 3072k,
total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:48f5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: no more MTRRs available
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2c00-0x2c07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x2c08-0x2c0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: COMPAQ SC-140C, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
EISA: Probing bus 0 at eisa0
EISA: Mainboard CPQ071E detected.
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:6): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
  Vendor: COMPAQ    Model: SDT-10000         Rev: 1.14
  Type:   Sequential-Access                  ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
ohci_hcd 0000:00:0f.2: irq 22, pci mem 0xecfd0000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ub: sizeof ub_scsi_cmd 64 ub_dev 2504
usbcore: registered new driver ub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins at debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 30729 blocks, 65536 bytes/block, largest
block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 052605-1143
Freeing unused kernel memory: 292k freed
Generic RTC Driver v1.07
apm: BIOS not found.
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: SMB base address uninitialized - upgrade BIOS or
use force_addr=0xaddr
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xeeeb0000, irq 18, MAC addr 00:02:A5:DA:20:54
HP CISS Driver (v 2.6.4)
cciss: Device 0xb178 has been found at bus 0 dev 1 func 0
cciss: using DAC cycles
      blocks= 35553120 block_size= 512
      heads= 255, sectors= 32, cylinders= 4357

      blocks= 35553120 block_size= 512
      heads= 255, sectors= 32, cylinders= 4357

 cciss/c0d0: p1 p2 p3 < p5 >
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Linux agpgart interface v0.100 (c) Dave Jones
apm: BIOS not found.
mtrr: no more MTRRs available
mtrr: no more MTRRs available
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03702e0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
root at 0[knoppix]#

Gruß

Andreas



-- 
Freiheit Freude Lust Genuss
gibt's im Forum Libertus
http://www.libertus.de




Mehr Informationen über die Mailingliste linux-l