[linux-l] festplatte problemchen
Ivan F. Villanueva B.
iv at artificialidea.com
Mi Aug 29 10:55:20 CEST 2007
Liebe Liste,
Ich bekomme komische Meldungen (*) beim Booten bezuglich meiner Festplatte. Weißt
jemand was sie bedeuten? Soll ich mir sorgen machen?
[ 11.445134] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:DMA
[ 0.875000] hda: SAMSUNG HM080HC, ATA DISK drive
[ 1.642000] hda: hw_config=603b (*)
[ 1.643000] hda: hw_config=603b (*)
[ 2.159000] hda: max request size: 512KiB
[ 2.199000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63<6>hda: hw_config=603b
[ 2.202000] hda: cache flushes supported
[ 2.203000] hda: hda1 hda2 hda3
[ 8.274000] hda: hw_config=603b (*)
[ 8.275000] hda: hw_config=603b (*)
[ 8.277000] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } (*)
[ 8.277000] hda: DMA disabled (*)
[ 8.278000] hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } (*)
[ 8.394000] hda: cache flushes supported
[ 10.426000] hda: hw_config=603b (*)
[ 10.427000] hda: hw_config=603b (*)
[ 10.429000] hda: cache flushes supported
[ 10.612000] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
[ 289.293000] EXT3 FS on hda1, internal journal
[root at samsung]# hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 156301488, start = 0
In /etc/hdparm.conf
...
ROOTFS = /dev/hda
...
/dev/hda {
mult_sect_io = 16
write_cache = on
dma = on
# io32_support = 1
lookahead = on
}
--
Iván F. Villanueva B.
A.I. Open Source project: -- www.artificialidea.com
FFII.org Deutschland -- de.ffii.org
FFII.org España -- es.ffii.org
Mehr Informationen über die Mailingliste linux-l