[linux-l] webcam medion 40323
bialas@nabu
bialas at nabu-frankfurt-oder.de
Di Dez 30 23:05:18 CET 2008
Ein recht schönen guten Abendan Alle,
ich habe mein Problem mit der Webcam gelöst. Ist schon peinlich wie
einfach. Entweder ich habe nach der Installation des gpsca Module und
dem Test der Webcamera meiner Tochter den Kernel später noch einmal neu
übersetzt oder was weiss. Jedenfalls gspca Modul mit make und make
install neu installiert und schon geht es.
mit den besten wünschen für das neue jahr
axel
bialas at nabu schrieb:
> Hallo an Alle,
> ich möchte mich mal wieder mit einem Problem an Euch wenden, eigentlich
> zwei, aber das zweite
> kommt in einer extra Mail.
>
> Ich habe ein webcam medion 40323 aus alten beständen erhalten. Lt.
> dieser Seite http://mxhaard.free.fr/
> soll diese auch funktionieren.
> Es wird kein gspca Modul geladen.
> Warum nicht ?
> Hat es etwas mit udev zu tun ? Wenn ja, kann mir jemand schreiben wie
> die Regel auszusehen hat ?
> Aber eigentlich habe ich keine Ahnung an was es liegen kann.
>
> Habe einen Laptop T41 mit debian 2.6.22.1 und 2.6.24-etchenhalf.
>
> Die Webcam ist .i.o., getestet an einem pc mit debian 2.6.26.1., gspca
> modul wird sofort geladen und bild
> ist zu sehen.
>
> Über hinweise würde ich mich freuen und mit besten Dank im voraus.
> axel
>
> Ps: möchte nicht unbeding 2.6.26.1 am Laptop installieren, da ich dann
> wieder mit vmware wokrstation herum
> fummeln müsste.
>
>
> dmesg
>
> usb 2-2: new full speed USB device using uhci_hcd and address 5
> usb 2-2: configuration #1 chosen from 1 choice
> scsi1 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 5
> usb-storage: waiting for device to settle before scanning
> scsi 1:0:0:0: Direct-Access 2MegaPen 1.00 PQ: 0
> ANSI: 0 CCS
> sd 1:0:0:0: [sda] 31712 512-byte hardware sectors (16 MB)
> sd 1:0:0:0: [sda] Write Protect is off
> sd 1:0:0:0: [sda] Mode Sense: 20 00 00 00
> sd 1:0:0:0: [sda] Assuming drive cache: write through
> sd 1:0:0:0: [sda] 31712 512-byte hardware sectors (16 MB)
> sd 1:0:0:0: [sda] Write Protect is off
> sd 1:0:0:0: [sda] Mode Sense: 20 00 00 00
> sd 1:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
> sd 1:0:0:0: [sda] Attached SCSI removable disk
> usb-storage: device scan complete
>
>
>
> lsusb
> Bus 004 Device 001: ID 0000:0000
> Bus 002 Device 003: ID 08ca:2009 Aiptek International, Inc.
> Bus 002 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
>
>
> umschalten auf webcam an der camera
>
> lsusb
> Bus 004 Device 001: ID 0000:0000
> Bus 002 Device 004: ID 08ca:2008 Aiptek International, Inc. Mini PenCam 2
> Bus 002 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
>
> dmesg
> usb 2-2: USB disconnect, address 5
> scsi 1:0:0:0: rejecting I/O to dead device
> scsi 1:0:0:0: rejecting I/O to dead device
> scsi 1:0:0:0: rejecting I/O to dead device
> scsi 1:0:0:0: rejecting I/O to dead device
> scsi 1:0:0:0: [sda] READ CAPACITY failed
> scsi 1:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
> driverbyte=DRIVER_OK,SUGGEST_OK
> scsi 1:0:0:0: [sda] Sense not available.
> scsi 1:0:0:0: rejecting I/O to dead device
> scsi 1:0:0:0: [sda] Write Protect is off
> scsi 1:0:0:0: [sda] Mode Sense: 00 00 00 00
> scsi 1:0:0:0: [sda] Assuming drive cache: write through
> scsi 1:0:0:0: rejecting I/O to dead device
> usb 2-2: new full speed USB device using uhci_hcd and address 6
> usb 2-2: configuration #1 chosen from 1 choice
>
>
>
> wenn ich die camera vor dem einstepseln einschalte und auf webcam einstelle
>
> lsusb
> Bus 004 Device 001: ID 0000:0000
> Bus 002 Device 007: ID 08ca:2008 Aiptek International, Inc. Mini PenCam 2
> Bus 002 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
>
>
> dmesg
>
> usb 2-2: USB disconnect, address 6
> usb 2-2: new full speed USB device using uhci_hcd and address 7
> usb 2-2: configuration #1 chosen from 1 choice
>
>
> lsmod
> Module Size Used by
> nls_iso8859_1 5248 0
> nls_cp437 6912 0
> vfat 13184 0
> fat 49564 1 vfat
> sd_mod 28288 0
> usb_storage 76224 0
> scsi_mod 137612 2 sd_mod,usb_storage
> isofs 33980 0
> vmnet 41140 13
> vmblock 15520 3
> vmmon 439084 0
> radeon 113184 2
> drm 77076 3 radeon
> ircomm_tty 36744 0
> ircomm 21892 1 ircomm_tty
> nsc_ircc 22288 0
> nfs 225516 0
> nfsd 205808 17
> exportfs 6656 1 nfsd
> lockd 61576 3 nfs,nfsd
> nfs_acl 4608 2 nfs,nfsd
> sunrpc 158972 13 nfs,nfsd,lockd,nfs_acl
> nvram 9352 1
> uinput 9984 1
> ppdev 9860 0
> lp 12068 0
> ac 6276 0
> button 9104 0
> dock 10784 0
> battery 11140 0
> container 5632 0
> sbs 19720 0
> video 17544 0
> autofs4 21508 1
> arc4 3072 2
> ecb 4608 2
> blkcipher 7300 1 ecb
> ieee80211_crypt_wep 6144 1
> ipv6 240804 19
> stir4200 13444 0
> fuse 43028 0
> loop 17924 0
> pcmcia 38188 0
> tsdev 9152 0
> joydev 10688 0
> snd_intel8x0 33052 0
> snd_intel8x0m 17804 5
> snd_ac97_codec 92576 2 snd_intel8x0,snd_intel8x0m
> ac97_bus 3456 1 snd_ac97_codec
> snd_pcm_oss 40224 0
> snd_mixer_oss 16512 1 snd_pcm_oss
> ipw2100 119140 0
> snd_pcm 72836 6
> snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
> snd_timer 21892 1 snd_pcm
> snd 49252 15
> snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> serio_raw 7812 0
> parport_pc 34980 1
> parport 34888 3 ppdev,lp,parport_pc
> yenta_socket 25868 2
> rsrc_nonstatic 13184 1 yenta_socket
> pcmcia_core 38548 3 pcmcia,yenta_socket,rsrc_nonstatic
> pcspkr 4096 0
> soundcore 8672 1 snd
> snd_page_alloc 10632 3 snd_intel8x0,snd_intel8x0m,snd_pcm
> i2c_i801 9360 0
> rtc 13464 0
> psmouse 37136 0
> intel_agp 24340 1
> shpchp 32276 0
> pci_hotplug 30400 1 shpchp
> agpgart 32968 2 drm,intel_agp
> evdev 10496 5
> ext3 122632 2
> jbd 56360 1 ext3
> mbcache 9476 1 ext3
> ide_cd 37536 0
> cdrom 34080 1 ide_cd
> ide_disk 17536 4
> generic 5892 0 [permanent]
> piix 9988 0 [permanent]
> ide_core 116292 5 usb_storage,ide_cd,ide_disk,generic,piix
> e1000 113856 0
> ehci_hcd 31628 0
> uhci_hcd 23824 0
> usbcore 125448 5 usb_storage,stir4200,ehci_hcd,uhci_hcd
> thermal 14600 0
> processor 31944 1 thermal
> fan 5892 0
>
>
> _______________________________________________
> linux-l mailing list
> linux-l at mlists.in-berlin.de
> Die Mailingliste der BeLUG (Berliner Linux User Group)
>
> Wenn du diese Mailingliste abbestellen willst, gehe bitte auf
> https://mlists.in-berlin.de/mailman/listinfo/linux-l-mlists.in-berlin.de
> und trage dich dort bitte aus
>
>
--
Axel Bialas
Vorsitzender
--------------------------------
NABU - KV Frankfurt (Oder) e.V.
Lindenstrasse 7
15230 Frankfurt (Oder)
Tel: +49 3 35.6 80 31 79
Fax: +49 3 35.6 06 75 33
Mail: bialas at NABU-Frankfurt-Oder.de
Web: www.NABU-Frankfurt-Oder.de
Mehr Informationen über die Mailingliste linux-l