nux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 524288 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xec00-0xec07, BIOS settings: hda:DMA, hdb:pio keyboard: Timeout - AT keyboard not present? keyboard: Timeout - AT keyboard not present? hda: IC35L060AVER07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: IC35L060AVER07-0, 58644MB w/1916kB Cache, CHS=7476/255/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ncr53c8xx: at PCI bus 0, device 10, function 0 ncr53c8xx: 53c895 detected with Tekram NVRAM ncr53c895-0: rev 0x1 on pci bus 0 device 10 function 0 irq 15 ncr53c895-0: Tekram format NVRAM, ID 7, Fast-40, Parity Checking scsi0 : ncr53c8xx-3.4.1-20000726 scsi : 1 host. Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: IBM Model: DCAS-32160 Rev: S63A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0 Vendor: HP Model: C1533A Rev: 9503 Type: Sequential-Access ANSI SCSI revision: 02 Vendor: HP Model: HP35470A Rev: 1043 Type: Sequential-Access ANSI SCSI revision: 02 scsi : detected 2 SCSI disks total. ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31) SCSI device sda: hdwr sector= 512 bytes. Sectors= 17916240 [8748 MB] [8.7 GB] ncr53c895-0-<4,*>: asynchronous. SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB] Partition check: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sdb: sdb1 hda: hda1 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 499704k swap-space (priority -1) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin and others eepro100.c: VA Linux custom, Dragan Stancevic 2000/11/15 eth0: Intel PCI EtherExpress Pro100 82557, 00:90:27:35:E7:DD, IRQ 12. Receiver lock-up bug exists -- enabling work-around. Board assembly 689661-004, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.114.6.7/1.94/1.140.6.3/1.85.6.2/none/1.5.6.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.41.6.1 HiSax: Layer2 Revision 2.25 HiSax: TeiMgr Revision 2.17 HiSax: Layer3 Revision 2.17.6.1 HiSax: LinkLayer Revision 2.51 HiSax: Approval certification failed because of HiSax: unauthorized source code changes HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM PCI driver Rev. 1.22.6.3 AVM PCI: stat 0x2020a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:11 base:0xE800 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 11 count 0 AVM Fritz PnP/PCI: IRQ 11 count 3 HiSax: DSS1 Rev. 2.30 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added PPP: version 2.3.7 (demand dialling) PPP line discipline registered. Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 ncr53c895-0-<2,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) sr0: scsi3-mmc drive: 12x/12x xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.11 tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov eth1: Digital DC21040 Tulip rev 36 at 0xe400, 00:C0:95:EC:EE:6B, IRQ 10. eth2: Digital DC21040 Tulip rev 36 at 0xc000, 00:C0:95:F0:42:B8, IRQ 12. eth3: Digital DC21040 Tulip rev 36 at 0xc400, EEPROM not present, 00:C0:95:F0:42:B9, IRQ 12. eth4: Digital DC21040 Tulip rev 36 at 0xc800, EEPROM not present, 00:C0:95:F0:42:BA, IRQ 12. eth5: Digital DC21040 Tulip rev 36 at 0xcc00, EEPROM not present, 00:C0:95:F0:42:BB, IRQ 12. isdn: Verbose-Level is 2 isdn: Verbose-Level is 2 ippp, open, slot: 0, minor: 1, state: 0000 ippp_ccp: allocated reset data structure becc6800 ippp, open, slot: 1, minor: 0, state: 0000 ippp_ccp: allocated reset data structure beb02000 eth2: No link beat found. ippp0: dialing 1 019256511... isdn_net: ippp0 connected isdn_net: local hangup ippp0 ippp0: Chargesum is 0 ippp, open, slot: 2, minor: 0, state: 0000 ippp_ccp: allocated reset data structure bd1bc800 ippp_ccp: freeing reset data structure beb02000 st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16. Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0 Detected scsi tape st1 at scsi0, channel 0, id 6, lun 0 ncr53c895-0-<5,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. isdn_net: Incoming call without OAD, assuming '0' isdn_net: call from 0,1,0 -> 78702032 isdn_net: Service-Indicator not 7, ignored isdn_tty: Incoming call without OAD, assuming '0' isdn_tty: call from 0 -> 78702032 ignored eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. eth2: No link beat found. ippp0: dialing 1 019256511... isdn_net: ippp0 connected isdn_net: local hangup ippp0 ippp0: Chargesum is 0 ippp, open, slot: 1, minor: 0, state: 0000 ippp_ccp: allocated reset data structure beed9000 ippp_ccp: freeing reset data structure bd1bc800 isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure isdn_net: ippp0: dial rejected: interface not in dialmode `auto', signalling dst_link_failure