linux-l: Erfolg: IDE-Brenner tut's ohne M$-chrott
Karl-Heinz Haag
kh at lux.in-berlin.de
Do Mär 18 09:45:21 CET 1999
Was ja schon lange _im Prinzip_ klar war, endlich geschafft:
es ist mir gelungen, meinen IDE! CD-Writer [Mitsumi 2801 TE] unter Linux
zum Brennen zu bewegen.
Mit meinem DEBIAN 2.0 hatte ich urspruenglich geglaubt, fuer die Arbeit
mit xcdroast sei alles perfekt vorkonfiguriert zum Loslegen-- das traf
jedoch nicht zu, denn zum IDE-Brennen haengt alles von der zutreffenden
Kernel-Einstellung ab. (bei RedHat gehts ebenso nicht auf Anhieb; was
ist mit SuSE 6.0 ?)
Anlass fuer meine Aktion war ebenfalls der in den letzten Monaten
gewonnene Eindruck, dass man auch in BELUG-Kreisen entweder ein System
mit SCSI zur Verfuegung hat oder stillschweigend -auch die
weitergegebenen Linux-Distributionen- mit M$-OSS brennt. 8-;(
Das erste hab ich nicht, das zweite will ich nicht (mehr).
--->Frage an die Kenner nur so nebenbei: Wie kommt
die auf den Linux-Tagen verkaufte DEBIAN 2.1
Binary-CD an ihre M$-Joliet-Extensions und wozu
braucht sie die?
Ich erlaube mir, fuer die interessierte Offentlichkeit die Ergebnisse
meiner Konfigurationsarbeiten in die Liste zu posten.
1.) Kernel 2.2.2 geholt. (ja,ja ... es war _letzte_ Woche)
2.) Mut bekommen durch fruehere mails in die Liste von
JSC <schlegel at lnx01.tfh-berlin.de> und
Florian Schintke<schintke at schintke.isdn.cs.tu-berlin.de>, dass ich
notfalls Musik und Daten ohne xcdroast per Kommandozeile brennen kann.
3.) Systemeigene-Doc's unter /usr/doc/..xcdroast ..mkisofs ..cdrecord
(..cdwrite) durchforstet nach problemrelevantem Material; HOWTO's ueber
IDE, SCSI, CD-Writing...; Doc's in den KernelSources.
4.) Einschlaegige Websites + FTPserver kontaktet:
als Startpunkte:
ftp://ftp.gwdg.de/linux/kernel/v2.2/
http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html
ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/
5.) per try&error verschieden konfigurierte kernel kompiliert, da
nirgends eine Schritt-fuer-Schritt-Vorgehensweise zu finden war.
Hier nun das (vorlaeufige) Ergebnis meiner Kernelkonfiguration: das
.config eines 2.2.2-Kernels, der auf meinem ausschliesslich mit
IDE-Geraeten bestueckten System CD's brennen kann.
(das .config aus '/usr/src/linux' im attachment)
Er laesst sich ganz gewiss noch optimieren in Richtung Modularisierung,
ich wollte jedoch zunaechst auf Nummer sicher gehen.
6.) die /etc/fstab umgeschrieben, da die beiden CD-Laufwerke nunmehr
nicht mehr auf '/dev/hdc' bzw. '/dev/hdd' wie vorher "hoeren", sondern
auf die SCSI-Geraetebezeichnungen '/dev/sr0' und /dev/sr1' (bei Debian
sind das s-links auf '/dev/scdX').
7.) Jetzt bin ich bei jedem Systemstart entzueckt von der Meldung, dass
der Kernel zwei "SCSI"-CD-ROMS gefunden hat:
dmesg:
...
...
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: MITSUMI Model: CR-2801TE Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: NEC Model: CD-ROM DRIVE:282 Rev: 3.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI cdroms total.
sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
Uniform CDROM driver Revision: 2.52
sr1: scsi3-mmc drive: 8x/8x xa/form2 cdda tray
...
...
Bei eigenen Versuchen viel Erfolg und vor allem Ausdauer!
Zur Warnung muss ich fuer potentielle Nachahmer gestehen, dass mir unter
xcdroast (mit cdrecord 1.6final-0.2) bereits die ersten drei Rohlinge
"verbrannt" sind. Moeglich, dass eine neuere Version weniger
verbrauchsintensiv ist, oder ich muss das Image mit single speed
schreiben?
Kann jemand mir was empfehlen?
Bye
Karl-Heinz
P.S.: Ich habe in einem der readme's gelesen, dass man den cdwriter
moeglichst
als master am ide-port einstellen soll; ob das zwingend ist, weiss ich
nicht; ich habe den Vorschlag befolgt.
-------------- nächster Teil --------------
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_JAVA=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_PARPORT is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_IP_ALIAS is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_RARP is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPV6=m
# CONFIG_IPV6_EUI64 is not set
# CONFIG_IPV6_NETLINK is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_SPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
CONFIG_ULTRA=y
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_ACENIC is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
# CONFIG_EEXPRESS_PRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_DLCI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
# CONFIG_TR is not set
# CONFIG_SHAPER is not set
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_RCPCI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA subsystem support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_PRINTER_READBACK is not set
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
#
# Video For Linux
#
CONFIG_VIDEO_DEV=m
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_GEMTEK is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Joystick support
#
# CONFIG_JOYSTICK is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFSD=y
# CONFIG_NFSD_SUN is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_PAS is not set
CONFIG_SOUND_SB=y
CONFIG_SB_BASE=220
CONFIG_SB_IRQ=5
CONFIG_SB_DMA=1
CONFIG_SB_DMA2=5
CONFIG_SB_MPU_BASE=330
CONFIG_SB_MPU_IRQ=-1
CONFIG_SOUND_ADLIB=m
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_CS4232 is not set
CONFIG_SOUND_OPL3SA2=m
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_AD1816 is not set
CONFIG_SOUND_OPL3SA1=m
# CONFIG_SOUND_SOFTOSS is not set
CONFIG_SOUND_YM3812=m
# CONFIG_SOUND_VMIDI is not set
CONFIG_SOUND_UART6850=m
#
# Additional low level sound drivers
#
# CONFIG_LOWLEVEL_SOUND is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
Mehr Informationen über die Mailingliste linux-l