[linux-l] festplatte problemchen
Ivan F. Villanueva B.
iv at artificialidea.com
Mi Aug 29 15:30:38 CEST 2007
Am Mi, Aug 29, 2007 01:59:25 +0200, Thorsten Stöcker schrieb:
> Hallo Ivan,
>
> welche Distri?
Debian testing
> Was gibt denn ein cat /proc/mounts zurück?
[ivan at samsung]% cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,data=ordered 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid 0 0
proc /proc proc rw,nosuid,nodev,noexec 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec 0 0
usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0
/dev/root /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /dev tmpfs rw 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
> Nach meiner Meinung ist alles okay, ich kann nur mit dem hw_config=603b nichts
> anfangen.
Und was ist mit:
[ 8.277000] hda: DMA disabled
?!
> > [ 11.445134] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA,
> > hdb:DMA
> > [ 0.875000] hda: SAMSUNG HM080HC, ATA DISK drive
> > [ 1.642000] hda: hw_config=603b (*)
> > [ 1.643000] hda: hw_config=603b (*)
> > [ 2.159000] hda: max request size: 512KiB
> > [ 2.199000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache,
> > CHS=16383/255/63<6>hda: hw_config=603b
> > [ 2.202000] hda: cache flushes
> > supported
> > [ 2.203000] hda: hda1 hda2 hda3
> > [ 8.274000] hda: hw_config=603b (*)
> > [ 8.275000] hda: hw_config=603b (*)
> > [ 8.277000] hda: dma_intr: status=0x58 { DriveReady SeekComplete
> > DataRequest } (*)
> > [ 8.277000] hda: DMA disabled (*)
> > [ 8.278000] hda: set_drive_speed_status: status=0x58 { DriveReady
> > SeekComplete DataRequest } (*)
> > [ 8.394000] hda: cache flushes supported
> > [ 10.426000] hda: hw_config=603b (*)
> > [ 10.427000] hda: hw_config=603b (*)
> > [ 10.429000] hda: cache flushes supported
> > [ 10.612000] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1
> > across:1951888k
> > [ 289.293000] EXT3 FS on hda1, internal journal
Mehr Informationen über die Mailingliste linux-l