[linux-l] Entpack- und Installationsproblem / Ralink-WLAN-Treiber
Gerard Bekhuis
odemarus at gmx.de
Di Mai 30 18:36:19 CEST 2017
Am 30.05.2017 um 14:31 schrieb Frank Reker:
> Am Tue 30. May 2017 13:58 +0200 schrieb et:
>
>> Es muss links stehen.
> naja, wenn usbcore von rt2800usb verwendet wird, dann muss das
> modul auch vorhanden sein. entweder direkt reinkompiliert (dann
> taucht es unter lsmod nicht auf) oder die liste ist abgeschnitten.
> scheint mir fuer heutige verhaeltnisse sowieso reichlich kurz...
> ansonsten einfach mal
> ls /sys/module
hier das Ergebnis:
do3adj at Amsterdam:~$ sudo ls /sys/module
[sudo] password for do3adj:
do3adj at Amsterdam:~$ sudo ls /sys/module
[sudo] password for do3adj:
6lowpan_iphc intel_idle rtsx_pci_sdmmc
8250 intel_powerclamp scsi_mod
ablk_helper intel_rapl sd_mod
ac ipv6 serio_raw
acpi iTCO_vendor_support sg
acpiphp iTCO_wdt shpchp
aesni_intel iwlmvm snd
aes_x86_64 iwlwifi snd_hda_codec
ahci jbd2 snd_hda_codec_conexant
apparmor joydev snd_hda_codec_generic
arc4 kernel snd_hda_codec_hdmi
autofs4 keyboard snd_hda_controller
battery kvm snd_hda_intel
block kvm_intel snd_hwdep
bluetooth libahci snd_pcm
btusb libata snd_timer
button lp soundcore
ccm lpc_ich spurious
cdrom lrw sr_mod
cfg80211 mac80211 syscall
coretemp mbcache sysrq
cpuidle media tcp_cubic
crc16 mei thermal
crc32c_intel mei_me thermal_sys
crc32_pclmul memstick thinkpad_acpi
crc_t10dif mfd_core tpm
crct10dif_common mii tpm_tis
crct10dif_generic mmc_core ttm
crct10dif_pclmul mousedev usb_common
cryptd mxm_wmi usbcore
ctr netpoll usbhid
drm nouveau uvcvideo
drm_kms_helper nvram v4l2_common
dynamic_debug parport vboxdrv
ecb parport_pc vboxnetadp
edac_core pcie_aspm vboxnetflt
ehci_hcd pciehp vboxpci
ehci_pci pci_hotplug video
evdev pci_slot videobuf2_core
ext4 pci_stub videobuf2_memops
firmware_class pcspkr videobuf2_vmalloc
fuse ppdev videodev
gf128mul printk vmhgfs
glue_helper processor vmw_vmci
hid psmouse vt
hid_logitech_dj pstore wmi
i2c_algo_bit r8169 workqueue
i2c_core rcupdate x86_pkg_temp_thermal
i2c_i801 rcutree xhci_hcd
i8042 rfkill xz_dec
i915 rtsx_pci zswap
ie31200_edac rtsx_pci_ms
do3adj at Amsterdam:~$ machen. dort tauchen auch die fest einkompilierten
module mit auf.
> was sagt denn dmesg.
> mach mal ein
> dmesg | tail -100
> etwa 5 bis 10 sekunden nachdem du den dongle angeschlossen hast.
> (natuerlich als root).
> do3adj at Amsterdam:~$ sudo dmesg | tail -100
> [ 641.406796] iwlwifi 0000:05:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
> [ 641.406813] iwlwifi 0000:05:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
> [ 641.406831] iwlwifi 0000:05:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
> [ 641.406849] iwlwifi 0000:05:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
> [ 641.406983] iwlwifi 0000:05:00.0: Start IWL Error Log Dump:
> [ 641.406990] iwlwifi 0000:05:00.0: Status: 0x00000000, count: 6
> [ 641.406996] iwlwifi 0000:05:00.0: Loaded firmware version: 23.214.9.0
> [ 641.407003] iwlwifi 0000:05:00.0: 0x00002778 | ADVANCED_SYSASSERT
> [ 641.407009] iwlwifi 0000:05:00.0: 0x000002B0 | uPc
> [ 641.407014] iwlwifi 0000:05:00.0: 0x00000000 | branchlink1
> [ 641.407020] iwlwifi 0000:05:00.0: 0x00000BA4 | branchlink2
> [ 641.407025] iwlwifi 0000:05:00.0: 0x000166A4 | interruptlink1
> [ 641.407031] iwlwifi 0000:05:00.0: 0x0003F51A | interruptlink2
> [ 641.407036] iwlwifi 0000:05:00.0: 0x00000050 | data1
> [ 641.407042] iwlwifi 0000:05:00.0: 0xDEADBEEF | data2
> [ 641.407048] iwlwifi 0000:05:00.0: 0xDEADBEEF | data3
> [ 641.407053] iwlwifi 0000:05:00.0: 0xDC401753 | beacon time
> [ 641.407059] iwlwifi 0000:05:00.0: 0x581D89F5 | tsf low
> [ 641.407064] iwlwifi 0000:05:00.0: 0x00000003 | tsf hi
> [ 641.407069] iwlwifi 0000:05:00.0: 0x00000000 | time gp1
> [ 641.407075] iwlwifi 0000:05:00.0: 0x11E199BF | time gp2
> [ 641.407080] iwlwifi 0000:05:00.0: 0x00000000 | time gp3
> [ 641.407086] iwlwifi 0000:05:00.0: 0x000417D6 | uCode version
> [ 641.407092] iwlwifi 0000:05:00.0: 0x00000144 | hw version
> [ 641.407097] iwlwifi 0000:05:00.0: 0x40489204 | board version
> [ 641.407103] iwlwifi 0000:05:00.0: 0x096B0080 | hcmd
> [ 641.407108] iwlwifi 0000:05:00.0: 0x00022080 | isr0
> [ 641.407114] iwlwifi 0000:05:00.0: 0x01000000 | isr1
> [ 641.407119] iwlwifi 0000:05:00.0: 0x00000003 | isr2
> [ 641.407125] iwlwifi 0000:05:00.0: 0x0041FCC0 | isr3
> [ 641.407130] iwlwifi 0000:05:00.0: 0x00000000 | isr4
> [ 641.407136] iwlwifi 0000:05:00.0: 0x01000112 | isr_pref
> [ 641.407141] iwlwifi 0000:05:00.0: 0x00000000 | wait_event
> [ 641.407147] iwlwifi 0000:05:00.0: 0x00000080 | l2p_control
> [ 641.407153] iwlwifi 0000:05:00.0: 0x00010020 | l2p_duration
> [ 641.407158] iwlwifi 0000:05:00.0: 0x0000003F | l2p_mhvalid
> [ 641.407164] iwlwifi 0000:05:00.0: 0x000000CE | l2p_addr_match
> [ 641.407169] iwlwifi 0000:05:00.0: 0x00000005 | lmpm_pmg_sel
> [ 641.407175] iwlwifi 0000:05:00.0: 0x18051651 | timestamp
> [ 641.407180] iwlwifi 0000:05:00.0: 0x000098A0 | flow_handler
> [ 641.407199] ieee80211 phy0: Hardware restart was requested
> [ 641.407228] iwlwifi 0000:05:00.0: FW error in SYNC CMD SCAN_REQUEST_CMD
> [ 641.407238] CPU: 3 PID: 723 Comm: wpa_supplicant Tainted: G O 3.16.0-4-amd64 #1 Debian 3.16.43-2
> [ 641.407242] Hardware name: LENOVO 20C600JAGE/20C600JAGE, BIOS J9ET88WW (2.08 ) 05/20/2014
> [ 641.407244] 0000000000000000 ffffffff81514201 00000000000001f4 ffff88023439b9b0
> [ 641.407251] ffffffffa061e10b ffff88023439b937 ffff880000000000 ffff8802316c6b60
> [ 641.407256] ffffffff810a95f0 ffff88023439b900 ffff88023439b900 ffff88023439b9b0
> [ 641.407261] Call Trace:
> [ 641.407271] [<ffffffff81514201>] ? dump_stack+0x5d/0x78
> [ 641.407294] [<ffffffffa061e10b>] ? iwl_trans_pcie_send_hcmd+0x46b/0x4a0 [iwlwifi]
> [ 641.407302] [<ffffffff810a95f0>] ? prepare_to_wait_event+0xf0/0xf0
> [ 641.407313] [<ffffffffa07723eb>] ? iwl_mvm_send_cmd_status+0x4b/0x140 [iwlmvm]
> [ 641.407324] [<ffffffffa07781ae>] ? iwl_mvm_scan_request+0x35e/0x440 [iwlmvm]
> [ 641.407334] [<ffffffffa076dca2>] ? iwl_mvm_mac_hw_scan+0xa2/0xc0 [iwlmvm]
> [ 641.407354] [<ffffffffa06f7f61>] ? __ieee80211_start_scan+0x181/0x5d0 [mac80211]
> [ 641.407361] [<ffffffff8101ca75>] ? sched_clock+0x5/0x10
> [ 641.407376] [<ffffffffa06f8dab>] ? ieee80211_request_scan+0x2b/0x50 [mac80211]
> [ 641.407394] [<ffffffffa0674890>] ? nl80211_trigger_scan+0x5b0/0x660 [cfg80211]
> [ 641.407405] [<ffffffff814544aa>] ? genl_family_rcv_msg+0x19a/0x360
> [ 641.407413] [<ffffffff81454670>] ? genl_family_rcv_msg+0x360/0x360
> [ 641.407419] [<ffffffff814546f9>] ? genl_rcv_msg+0x89/0xd0
> [ 641.407424] [<ffffffff81452899>] ? netlink_rcv_skb+0xa9/0xc0
> [ 641.407430] [<ffffffff81452d54>] ? genl_rcv+0x24/0x40
> [ 641.407436] [<ffffffff814521ea>] ? netlink_unicast+0x15a/0x240
> [ 641.407441] [<ffffffff812bfbcb>] ? memcpy_fromiovec+0x4b/0x80
> [ 641.407447] [<ffffffff814525d5>] ? netlink_sendmsg+0x305/0x410
> [ 641.407453] [<ffffffff8140c20b>] ? sock_sendmsg+0x8b/0xc0
> [ 641.407459] [<ffffffff8140bf39>] ? move_addr_to_kernel.part.17+0x19/0x60
> [ 641.407465] [<ffffffff8140c8ef>] ? ___sys_sendmsg+0x29f/0x3a0
> [ 641.407473] [<ffffffff811e6f0a>] ? fsnotify_clear_marks_by_inode+0x2a/0x110
> [ 641.407479] [<ffffffff8101c4d5>] ? read_tsc+0x5/0x20
> [ 641.407486] [<ffffffff810c9b12>] ? ktime_get_ts+0x42/0xe0
> [ 641.407492] [<ffffffff811be167>] ? poll_select_copy_remaining+0xe7/0x140
> [ 641.407498] [<ffffffff8140d081>] ? __sys_sendmsg+0x41/0x80
> [ 641.407505] [<ffffffff8151a40d>] ? system_call_fast_compare_end+0x10/0x15
> [ 641.407512] iwlwifi 0000:05:00.0: Scan failed! status 0x1 ret -5
> [ 641.407991] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled
> [ 641.408207] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled
> [ 787.975329] usb 3-6: new high-speed USB device number 6 using xhci_hcd
> [ 788.177171] usb 3-6: New USB device found, idVendor=148f, idProduct=3070
> [ 788.177179] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 788.177183] usb 3-6: Product: 802.11 n WLAN
> [ 788.177187] usb 3-6: Manufacturer: Ralink
> [ 788.177190] usb 3-6: SerialNumber: 1.0
> [ 789.464489] usb 3-6: reset high-speed USB device number 6 using xhci_hcd
> [ 789.658743] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36fe48
> [ 789.658752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36fe00
> [ 789.658756] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36fe90
> [ 789.658759] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36fed8
> [ 789.658762] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36ff20
> [ 789.658766] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36ff68
> [ 789.658769] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88009d36ffb0
> [ 789.659453] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
> [ 789.670605] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
> [ 789.670958] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
> [ 789.671593] usbcore: registered new interface driver rt2800usb
> [ 789.726726] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
> [ 789.757356] rt2800usb 3-6:1.0: firmware: direct-loading firmware rt2870.bin
> [ 789.757363] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
> [ 789.951442] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
> do3adj at Amsterdam:~$
>
Gérard
>
Mehr Informationen über die Mailingliste linux-l