[linux-l] Lilo
Sebastian Andres
sebastian at sebastianandres.de
Do Apr 6 19:45:23 CEST 2006
Hi!
Habe jetzt auf meinem Notebook Windows XP neu aufgespielt und möchte jetzt
lilo in betrieb nehmen, damit ich auch an mein installiertes grml komme.
Allerdings kenne ich mich mit Lilo nicht aus, verwnede eigentlich immer
grub.
Halte beim aufruf von lilo eine Fehlermeldung, auf /dev/hda4 kann nicht
zugegriffen werden warum?
mein vorgehen:
boote knoppix 5.0
mounte /mnt/hda4 (read und write sonst nichts!)
chroot /mnt/hda4
mount -t proc proc /proc
Hier noch meine Konfiguration /etc/lilo.conf:
Ach WinXP ist auf Partition /dev/hda2 und grml auf /dev/hda4
# This allows booting from any partition on disks with more than 1024
# cylinders.
lba32
# Specifies the boot device
boot=/dev/hda
# Specifies the device that should be mounted as root.
# If the special name CURRENT is used, the root device is set to the
# device on which the root file system is currently mounted. If the root
# has been changed with -r , the respective device is used. If the
# variable ROOT is omitted, the root device setting contained in the
# kernel image is used. It can be changed with the rdev program.
root=/dev/hda4
bitmap=/boot/bootscreen.bmp
bmp-colors=138,,190,134,,190
bmp-table=210p,280p,1,10,150p
bmp-timer=540p,50p,125,0,190
install=bmp
prompt
timeout=50
map=/boot/map
vga=normal
other=/dev/hda2
label=Windows_XP
boot-as=0x80
image=/boot/vmlinuz-2.6.15-grml
label="2.6.15-grml"
#append="video=vesafb:ypan,1024x768-16 at 60 loadkeys de "
append="grml_from_hd "
read-only
vga=0x0317
initrd=/boot/initrd.img-2.6.15-grml
image=/boot/vmlinuz-2.6.15-grml
label="grml-debug"
append="debug log nocolor "
read-only
initrd=/boot/initrd.img-2.6.15-grml
image=/boot/vmlinuz-2.6.15-grml
label="grml-nofb"
append="video=ofonly "
read-only
initrd=/boot/initrd.img-2.6.15-grml
image=/boot/memtest86+.bin
label="Memory Test+"
read-only
Mfg. Sebastian
Mehr Informationen über die Mailingliste linux-l